|
|
- The openconnect server expects to be configured using the uci interface.
-
- To setup a server the provides access to LAN with network address
- 10.100.2.0/255.255.255.0 using the VPN address range
- 10.100.3.0/255.255.255.0 add the following to /etc/config/ocserv:
-
- -----------------------------------------------------------------
- config ocserv 'config'
- option port '4443'
- option dpd '120'
- option max_clients '8'
- option max_same '2'
- option netmask '255.255.255.0'
- option ipaddr '10.100.3.0'
- option auth 'plain'
- option zone 'lan'
- option fwport '4443'
- option enable '1'
-
- config dns
- option ip '10.100.2.1'
-
- config routes
- option ip '10.100.2.0'
- option netmask '255.255.255.0'
-
- config ocservusers
- option name 'test'
- option password '$5$unl8uKAGNsdTh9zm$PnUHEGhDc5VHbFE2EfWwW38Bub6Y6EZ5hrFwZE1r2F1'
-
- -----------------------------------------------------------------
-
- This configuration also adds the user "test" with password "test". The
- password is specified in the crypt(3) format.
-
- The server can be enabled and started using:
- # /etc/init.d/ocserv enable
- # /etc/init.d/ocserv start
-
-
-
- There is a luci plugin to allow configuring the server from
- the web environment, available as patch over luci at
- https://github.com/nmav/luci-openconnect/tree/openconnect
|
