|
|
- ;
- ; Sample l2tpd configuration file
- ;
- ; This example file should give you some idea of how the options for l2tpd
- ; should work. The best place to look for a list of all options is in
- ; the source code itself, until I have the time to write better documetation :)
- ; Specifically, the file "file.c" contains a list of commands at the end.
- ;
- ; You most definitely don't have to spell out everything as it is done here
- ;
- ; [global] ; Global parameters:
- ; port = 1701 ; * Bind to port 1701
- ; auth file = /etc/xl2tpd/xl2tp-secrets ; * Where our challenge secrets are
- ; access control = yes ; * Refuse connections without IP match
- ; rand source = dev ; Source for entropy for random
- ; ; numbers, options are:
- ; ; dev - reads of /dev/urandom
- ; ; sys - uses rand()
- ; ; egd - reads from egd socket
- ; ; egd is not yet implemented
- ;
- ; [lns default] ; Our fallthrough LNS definition
- ; exclusive = no ; * Only permit one tunnel per host
- ; ip range = 192.168.0.1-192.168.0.20 ; * Allocate from this IP range
- ; no ip range = 192.168.0.3-192.168.0.9 ; * Except these hosts
- ; ip range = 192.168.0.5 ; * But this one is okay
- ; ip range = lac1-lac2 ; * And anything from lac1 to lac2's IP
- ; lac = 192.168.1.4 - 192.168.1.8 ; * These can connect as LAC's
- ; no lac = untrusted.marko.net ; * This guy can't connect
- ; hidden bit = no ; * Use hidden AVP's?
- ; local ip = 192.168.1.2 ; * Our local IP to use
- ; length bit = yes ; * Use length bit in payload?
- ; require chap = yes ; * Require CHAP auth. by peer
- ; refuse pap = yes ; * Refuse PAP authentication
- ; refuse chap = no ; * Refuse CHAP authentication
- ; refuse authentication = no ; * Refuse authentication altogether
- ; require authentication = yes ; * Require peer to authenticate
- ; unix authentication = no ; * Use /etc/passwd for auth.
- ; name = myhostname ; * Report this as our hostname
- ; ppp debug = no ; * Turn on PPP debugging
- ; pppoptfile = /etc/ppp/options.xl2tpd.lns ; * ppp options file
- ; call rws = 10 ; * RWS for call (-1 is valid)
- ; tunnel rws = 4 ; * RWS for tunnel (must be > 0)
- ; flow bit = yes ; * Include sequence numbers
- ; challenge = yes ; * Challenge authenticate peer ;
- ;
- ; [lac marko] ; Example VPN LAC definition
- ; lns = lns.marko.net ; * Who is our LNS?
- ; lns = lns2.marko.net ; * A backup LNS (not yet used)
- ; redial = yes ; * Redial if disconnected?
- ; redial timeout = 15 ; * Wait n seconds between redials
- ; max redials = 5 ; * Give up after n consecutive failures
- ; hidden bit = yes ; * User hidden AVP's?
- ; local ip = 192.168.1.1 ; * Force peer to use this IP for us
- ; remote ip = 192.168.1.2 ; * Force peer to use this as their IP
- ; length bit = no ; * Use length bit in payload?
- ; require pap = no ; * Require PAP auth. by peer
- ; require chap = yes ; * Require CHAP auth. by peer
- ; refuse pap = yes ; * Refuse PAP authentication
- ; refuse chap = no ; * Refuse CHAP authentication
- ; refuse authentication = no ; * Refuse authentication altogether
- ; require authentication = yes ; * Require peer to authenticate
- ; name = marko ; * Report this as our hostname
- ; ppp debug = no ; * Turn on PPP debugging
- ; pppoptfile = /etc/ppp/options.xl2tpd.marko ; * ppp options file for this lac
- ; call rws = 10 ; * RWS for call (-1 is valid)
- ; tunnel rws = 4 ; * RWS for tunnel (must be > 0)
- ; flow bit = yes ; * Include sequence numbers
- ; challenge = yes ; * Challenge authenticate peer
- ;
- ; [lac cisco] ; Another quick LAC
- ; lns = cisco.marko.net ; * Required, but can take from default
- ; require authentication = yes
|
