|
|
- # Sample multimon configuration file
- #
- # This file is not required. Without it, multimon will use the default
- # field layout.
- #
- # Temperature selection
- #
- # Pick "TEMPC" for Celsius or "TEMPF" for Fahrenheit. This will override
- # the --enable-celsius setting from the compile. UPSTEMP (below) will
- # use this setting by default.
-
- TEMPC
-
- # Format:
- # FIELD <variable> "<field name>" "<field suffix>"
- #
- # <variable> is either a word from the UPS protocol like battchg (see the
- # table in src/cgi/upsfetch.c) or a special word in uppercase.
- #
- # Special words are:
- # MODEL - Show the model name for this system in cyan
- #
- # STATUS - Parse the status for this system using the appropriate color
- #
- # UPSTEMP and AMBTEMP use the default scale. This is set to C if you use
- # --enable-celsius at compile time *or* if you use "TEMPC" above.
- #
- # UPSTEMP - Show the UPS temperature in the default scale (suffix ignored)
- # AMBTEMP - Show the ambient temperature in the default scale (suffix ignored)
- #
- # UPSTEMPC - Show the UPS temperature in degrees C (suffix ignored)
- # UPSTEMPF - Show the UPS temperature in degrees F (suffix ignored)
- # AMBTEMPC - Show the ambient temperature in degrees C (suffix ignored)
- # AMBTEMPF - Show the ambient temperature in degrees F (suffix ignored)
- #
- # They're called "special" since they actually understand the content
- # being printed and do other things based on what's in there.
- #
- # <field name> is what you'd like this column to be called on the page.
- # Remember that this is HTML, so you can actually embed markup in here.
- # This means you can even include images here. You can include quotes
- # (and backslashes!) in the string by escaping them with a backslash (\).
- #
- # <field suffix> is typically something like % or VAC. It's useful if
- # you want to convey the units that apply to a value.
- #
- # Example config
-
- FIELD SYSTEM "System" ""
- FIELD MODEL "Model" ""
- FIELD STATUS "Status" ""
- FIELD battpct "Battery Chg" "%"
- FIELD utility "Utility" "VAC"
- FIELD loadpct "UPS Load" "%"
- FIELD UPSTEMP "UPS Temp" ""
- FIELD runtime "Batt. Run Time" "min."
- FIELD DATA "Data" "All data"
-
- # These are only useful if you have a Smart-UPS model with the Measure-UPS II
- # measurement card. No other models presently support these features.
- #
- # FIELD AMBTEMP "Ambient Temp" ""
- # FIELD HUMIDITY "Ambient Humidity" "%"
|
