|
|
- config 'etherwake' 'setup'
- # possible program paths
- option 'pathes' '/usr/bin/etherwake /usr/bin/ether-wake'
- # use sudo, defaults to off
- option 'sudo' 'off'
- # interface, defaults to 'eth0'
- # -i <ifname>
- option 'interface' ''
- # send wake-up packet to the broadcast address, defaults to off
- # -b
- option 'broadcast' 'off'
-
- config 'target'
- # name for the target
- option 'name' 'example'
- # mac address to wake up
- option 'mac' '11:22:33:44:55:66'
- # password in hex without any delimiters
- option 'password' 'AABBCCDDEEFF'
- # wake up on system start, defaults to off
- option 'wakeonboot' 'off'
-
- # To add a new target use:
- # uci add etherwake target
- # uci set etherwake.@target[-1].name=example
- # uci set etherwake.@target[-1].mac=11:22:33:44:55:66
- # uci set etherwake.@target[-1].password=AABBCCDDEEFF
- # uci set etherwake.@target[-1].wakeonboot=off
|
