openwrt-packages-dist/net/freeradius2/patches/002-config.patch

Index: freeradius-server-2.2.7/raddb/dictionary.in
===================================================================
--- freeradius-server-2.2.7.orig/raddb/dictionary.in
+++ freeradius-server-2.2.7/raddb/dictionary.in
@@ -11,7 +11,7 @@
 #
 #	The filename given here should be an absolute path. 
 #
-$INCLUDE	@prefix@/share/freeradius/dictionary
+$INCLUDE	@prefix@/share/freeradius2/dictionary
 
 #
 #	Place additional attributes or $INCLUDEs here.  They will
Index: freeradius-server-2.2.7/raddb/eap.conf
===================================================================
--- freeradius-server-2.2.7.orig/raddb/eap.conf
+++ freeradius-server-2.2.7/raddb/eap.conf
@@ -27,7 +27,7 @@
 		#  then that EAP type takes precedence over the
 		#  default type configured here.
 		#
-		default_eap_type = md5
+		default_eap_type = peap
 
 		#  A list is maintained to correlate EAP-Response
 		#  packets with EAP-Request packets.  After a
@@ -72,8 +72,8 @@
 		#  for wireless connections.  It is insecure, and does
 		#  not provide for dynamic WEP keys.
 		#
-		md5 {
-		}
+#		md5 {
+#		}
 
 		# Cisco LEAP
 		#
@@ -87,8 +87,8 @@
 		#  User-Password, or the NT-Password attributes.
 		#  'System' authentication is impossible with LEAP.
 		#
-		leap {
-		}
+#		leap {
+#		}
 
 		#  Generic Token Card.
 		#
@@ -101,7 +101,7 @@
 		#  the users password will go over the wire in plain-text,
 		#  for anyone to see.
 		#
-		gtc {
+#		gtc {
 			#  The default challenge, which many clients
 			#  ignore..
 			#challenge = "Password: "
@@ -118,8 +118,8 @@
 			#  configured for the request, and do the
 			#  authentication itself.
 			#
-			auth_type = PAP
-		}
+#			auth_type = PAP
+#		}
 
 		## EAP-TLS
 		#
@@ -215,7 +215,7 @@
 			#  In these cases, fragment size should be
 			#  1024 or less.
 			#
-		#	fragment_size = 1024
+			fragment_size = 1024
 
 			#  include_length is a flag which is
 			#  by default set to yes If set to
@@ -225,7 +225,7 @@
 			#  message is included ONLY in the
 			#  First packet of a fragment series.
 			#
-		#	include_length = yes
+			include_length = yes
 
 			#  Check the Certificate Revocation List
 			#
@@ -297,7 +297,7 @@
 			# for the server to print out an error message,
 			# and refuse to start.
 			#
-			make_cert_command = "${certdir}/bootstrap"
+		#	make_cert_command = "${certdir}/bootstrap"
 
 			#
 			#  Elliptical cryptography configuration
@@ -332,7 +332,7 @@
 			#  You probably also want "use_tunneled_reply = yes"
 			#  when using fast session resumption.
 			#
-			cache {
+		#	cache {
 			      #
 			      #  Enable it.  The default is "no".
 			      #  Deleting the entire "cache" subsection
@@ -348,14 +348,14 @@
 			      #  enable resumption for just one user
 			      #  by setting the above attribute to "yes".
 			      #
-			      enable = no
+		#	      enable = no
 
 			      #
 			      #  Lifetime of the cached entries, in hours.
 			      #  The sessions will be deleted after this
 			      #  time.
 			      #
-			      lifetime = 24 # hours
+		#	      lifetime = 24 # hours
 
 			      #
 			      #  The maximum number of entries in the
@@ -364,8 +364,8 @@
 			      #  This could be set to the number of users
 			      #  who are logged in... which can be a LOT.
 			      #
-			      max_entries = 255
-			}
+		#	      max_entries = 255
+		#	}
 
 			#
 			#  As of version 2.1.10, client certificates can be
@@ -503,7 +503,7 @@
 		#
 		#  in the control items for a request.
 		#
-		ttls {
+#		ttls {
 			#  The tunneled EAP session needs a default
 			#  EAP type which is separate from the one for
 			#  the non-tunneled EAP module.  Inside of the
@@ -511,7 +511,7 @@
 			#  If the request does not contain an EAP
 			#  conversation, then this configuration entry
 			#  is ignored.
-			default_eap_type = md5
+#			default_eap_type = mschapv2
 
 			#  The tunneled authentication request does
 			#  not usually contain useful attributes
@@ -527,7 +527,7 @@
 			#  is copied to the tunneled request.
 			#
 			# allowed values: {no, yes}
-			copy_request_to_tunnel = no
+#			copy_request_to_tunnel = yes
 
 			#  The reply attributes sent to the NAS are
 			#  usually based on the name of the user
@@ -540,7 +540,7 @@
 			#  the tunneled request.
 			#
 			# allowed values: {no, yes}
-			use_tunneled_reply = no
+#			use_tunneled_reply = no
 
 			#
 			#  The inner tunneled request can be sent
@@ -552,13 +552,13 @@
 			#  the virtual server that processed the
 			#  outer requests.
 			#
-			virtual_server = "inner-tunnel"
+#			virtual_server = "inner-tunnel"
 
 			#  This has the same meaning as the
 			#  same field in the "tls" module, above.
 			#  The default value here is "yes".
 		#	include_length = yes
-		}
+#		}
 
 		##################################################
 		#
@@ -627,14 +627,14 @@
 
 			#  the PEAP module also has these configuration
 			#  items, which are the same as for TTLS.
-			copy_request_to_tunnel = no
-			use_tunneled_reply = no
+			copy_request_to_tunnel = yes
+			use_tunneled_reply = yes
 
 			#  When the tunneled session is proxied, the
 			#  home server may not understand EAP-MSCHAP-V2.
 			#  Set this entry to "no" to proxy the tunneled
 			#  EAP-MSCHAP-V2 as normal MSCHAPv2.
-		#	proxy_tunneled_request_as_eap = yes
+			proxy_tunneled_request_as_eap = no
 
 			#
 			#  The inner tunneled request can be sent
@@ -646,7 +646,8 @@
 			#  the virtual server that processed the
 			#  outer requests.
 			#
-			virtual_server = "inner-tunnel"
+		#	virtual_server = "inner-tunnel"
+			EAP-TLS-Require-Client-Cert = no
 
 			# This option enables support for MS-SoH
 			# see doc/SoH.txt for more info.
Index: freeradius-server-2.2.7/raddb/modules/counter
===================================================================
--- freeradius-server-2.2.7.orig/raddb/modules/counter
+++ freeradius-server-2.2.7/raddb/modules/counter
@@ -69,7 +69,7 @@
 #  'check-name' attribute.
 #
 counter daily {
-	filename = ${db_dir}/db.daily
+	filename = ${radacctdir}/db.daily
 	key = User-Name
 	count-attribute = Acct-Session-Time
 	reset = daily
Index: freeradius-server-2.2.7/raddb/modules/pap
===================================================================
--- freeradius-server-2.2.7.orig/raddb/modules/pap
+++ freeradius-server-2.2.7/raddb/modules/pap
@@ -18,5 +18,5 @@
 #
 #  http://www.openldap.org/faq/data/cache/347.html
 pap {
-	auto_header = no
+	auto_header = yes
 }
Index: freeradius-server-2.2.7/raddb/modules/radutmp
===================================================================
--- freeradius-server-2.2.7.orig/raddb/modules/radutmp
+++ freeradius-server-2.2.7/raddb/modules/radutmp
@@ -12,7 +12,7 @@ radutmp {
 	#  Where the file is stored.  It's not a log file,
 	#  so it doesn't need rotating.
 	#
-	filename = ${logdir}/radutmp
+	filename = ${radacctdir}/radutmp
 
 	#  The field in the packet to key on for the
 	#  'user' name,  If you have other fields which you want
Index: freeradius-server-2.2.7/raddb/modules/sradutmp
===================================================================
--- freeradius-server-2.2.7.orig/raddb/modules/sradutmp
+++ freeradius-server-2.2.7/raddb/modules/sradutmp
@@ -10,7 +10,7 @@
 # then name "sradutmp" to identify it later in the "accounting"
 # section.
 radutmp sradutmp {
-	filename = ${logdir}/sradutmp
+	filename = ${radacctdir}/sradutmp
 	perm = 0644
 	callerid = "no"
 }
Index: freeradius-server-2.2.7/raddb/radiusd.conf.in
===================================================================
--- freeradius-server-2.2.7.orig/raddb/radiusd.conf.in
+++ freeradius-server-2.2.7/raddb/radiusd.conf.in
@@ -66,7 +66,7 @@ name = radiusd
 
 #  Location of config and logfiles.
 confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/${name}
+run_dir = ${localstatedir}/run
 
 # Should likely be ${localstatedir}/lib/radiusd
 db_dir = ${raddbdir}
@@ -323,7 +323,7 @@ listen {
 	#  If your system does not support this feature, you will
 	#  get an error if you try to use it.
 	#
-#	interface = eth0
+	interface = br-lan
 
 	#  Per-socket lists of clients.  This is a very useful feature.
 	#
@@ -350,7 +350,7 @@ listen {
 #	ipv6addr = ::
 	port = 0
 	type = acct
-#	interface = eth0
+	interface = br-lan
 #	clients = per_socket_clients
 }
 
@@ -576,8 +576,8 @@ security {
 #
 #  allowed values: {no, yes}
 #
-proxy_requests  = yes
-$INCLUDE proxy.conf
+proxy_requests  = no
+#$INCLUDE proxy.conf
 
 
 # CLIENTS CONFIGURATION
@@ -774,7 +774,7 @@ instantiate {
 	#  The entire command line (and output) must fit into 253 bytes.
 	#
 	#  e.g. Framed-Pool = `%{exec:/bin/echo foo}`
-	exec
+#	exec
 
 	#
 	#  The expression module doesn't do authorization,
@@ -791,15 +791,15 @@ instantiate {
 	#  other xlat functions such as md5, sha1 and lc.
 	#
 	#  We do not recommend removing it's listing here.
-	expr
+#	expr
 
 	#
 	# We add the counter module here so that it registers
 	# the check-name attribute before any module which sets
 	# it
 #	daily
-	expiration
-	logintime
+#	expiration
+#	logintime
 
 	# subsections here can be thought of as "virtual" modules.
 	#
@@ -823,7 +823,7 @@ instantiate {
 #	to multiple times.
 #
 ######################################################################
-$INCLUDE policy.conf
+#$INCLUDE policy.conf
 
 ######################################################################
 #
@@ -833,9 +833,9 @@ $INCLUDE policy.conf
 #	match the regular expression: /[a-zA-Z0-9_.]+/
 #
 #	It allows you to define new virtual servers simply by placing
-#	a file into the raddb/sites-enabled/ directory.
+#	a file into the /etc/freeradius2/sites/ directory.
 #
-$INCLUDE sites-enabled/
+$INCLUDE sites/
 
 ######################################################################
 #
@@ -843,7 +843,7 @@ $INCLUDE sites-enabled/
 #	"authenticate {}", "accounting {}", have been moved to the
 #	the file:
 #
-#		raddb/sites-available/default
+#		/etc/freeradius2/sites/default
 #
 #	This is the "default" virtual server that has the same
 #	configuration as in version 1.0.x and 1.1.x.  The default
Index: freeradius-server-2.2.7/raddb/sites-available/default
===================================================================
--- freeradius-server-2.2.7.orig/raddb/sites-available/default
+++ freeradius-server-2.2.7/raddb/sites-available/default
@@ -85,7 +85,7 @@ authorize {
 	#
 	#  It takes care of processing the 'raddb/hints' and the
 	#  'raddb/huntgroups' files.
-	preprocess
+#	preprocess
 
 	#
 	#  If you want to have a log of authentication requests,
@@ -96,7 +96,7 @@ authorize {
 	#
 	#  The chap module will set 'Auth-Type := CHAP' if we are
 	#  handling a CHAP request and Auth-Type has not already been set
-	chap
+#	chap
 
 	#
 	#  If the users are logging in with an MS-CHAP-Challenge
@@ -104,13 +104,13 @@ authorize {
 	#  the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
 	#  to the request, which will cause the server to then use
 	#  the mschap module for authentication.
-	mschap
+#	mschap
 
 	#
 	#  If you have a Cisco SIP server authenticating against
 	#  FreeRADIUS, uncomment the following line, and the 'digest'
 	#  line in the 'authenticate' section.
-	digest
+#	digest
 
 	#
 	#  The WiMAX specification says that the Calling-Station-Id
@@ -133,7 +133,7 @@ authorize {
 	#  Otherwise, when the first style of realm doesn't match,
 	#  the other styles won't be checked.
 	#
-	suffix
+#	suffix
 #	ntdomain
 
 	#
@@ -197,8 +197,8 @@ authorize {
 	# Use the checkval module
 #	checkval
 
-	expiration
-	logintime
+#	expiration
+#	logintime
 
 	#
 	#  If no other module has claimed responsibility for
@@ -279,7 +279,7 @@ authenticate {
 	#  If you have a Cisco SIP server authenticating against
 	#  FreeRADIUS, uncomment the following line, and the 'digest'
 	#  line in the 'authorize' section.
-	digest
+#	digest
 
 	#
 	#  Pluggable Authentication Modules.
@@ -296,7 +296,7 @@ authenticate {
 	#  be used for authentication ONLY for compatibility with legacy
 	#  FreeRADIUS configurations.
 	#
-	unix
+#	unix
 
 	# Uncomment it if you want to use ldap for authentication
 	#
@@ -332,8 +332,8 @@ authenticate {
 #
 #  Pre-accounting.  Decide which accounting type to use.
 #
-preacct {
-	preprocess
+#preacct {
+#	preprocess
 
 	#
 	#  Session start times are *implied* in RADIUS.
@@ -356,7 +356,7 @@ preacct {
 	#
 	#  Ensure that we have a semi-unique identifier for every
 	#  request, and many NAS boxes are broken.
-	acct_unique
+#	acct_unique
 
 	#
 	#  Look for IPASS-style 'realm/', and if not found, look for
@@ -366,13 +366,13 @@ preacct {
 	#  Accounting requests are generally proxied to the same
 	#  home server as authentication requests.
 #	IPASS
-	suffix
+#	suffix
 #	ntdomain
 
 	#
 	#  Read the 'acct_users' file
-	files
-}
+#	files
+#}
 
 #
 #  Accounting.  Log the accounting data.
@@ -382,7 +382,7 @@ accounting {
 	#  Create a 'detail'ed log of the packets.
 	#  Note that accounting requests which are proxied
 	#  are also logged in the detail file.
-	detail
+#	detail
 #	daily
 
 	#  Update the wtmp file
@@ -434,7 +434,7 @@ accounting {
 	exec
 
 	#  Filter attributes from the accounting response.
-	attr_filter.accounting_response
+	#attr_filter.accounting_response
 
 	#
 	#  See "Autz-Type Status-Server" for how this works.
@@ -460,7 +460,7 @@ session {
 #  Post-Authentication
 #  Once we KNOW that the user has been authenticated, there are
 #  additional steps we can take.
-post-auth {
+#post-auth {
 	#  Get an address from the IP Pool.
 #	main_pool
 
@@ -490,7 +490,7 @@ post-auth {
 #	ldap
 
 	# For Exec-Program and Exec-Program-Wait
-	exec
+#	exec
 
 	#
 	#  Calculate the various WiMAX keys.  In order for this to work,
@@ -574,18 +574,18 @@ post-auth {
 	#  Add the ldap module name (or instance) if you have set 
 	#  'edir_account_policy_check = yes' in the ldap module configuration
 	#
-	Post-Auth-Type REJECT {
-		# log failed authentications in SQL, too.
+#	Post-Auth-Type REJECT {
+#		# log failed authentications in SQL, too.
 #		sql
 
 		# Insert EAP-Failure message if the request was
 		# rejected by policy instead of because of an
 		# authentication failure
-		eap
+#		eap
 
-		attr_filter.access_reject
-	}
-}
+#		attr_filter.access_reject
+#	}
+#}
 
 #
 #  When the server decides to proxy a request to a home server,
@@ -595,7 +595,7 @@ post-auth {
 #
 #  Only a few modules currently have this method.
 #
-pre-proxy {
+#pre-proxy {
 #	attr_rewrite
 
 	#  Uncomment the following line if you want to change attributes
@@ -611,14 +611,14 @@ pre-proxy {
 	#  server, un-comment the following line, and the
 	#  'detail pre_proxy_log' section, above.
 #	pre_proxy_log
-}
+#}
 
 #
 #  When the server receives a reply to a request it proxied
 #  to a home server, the request may be massaged here, in the
 #  post-proxy stage.
 #
-post-proxy {
+#post-proxy {
 
 	#  If you want to have a log of replies from a home server,
 	#  un-comment the following line, and the 'detail post_proxy_log'
@@ -642,7 +642,7 @@ post-proxy {
 	#  hidden inside of the EAP packet, and the end server will
 	#  reject the EAP request.
 	#
-	eap
+#	eap
 
 	#
 	#  If the server tries to proxy a request and fails, then the
@@ -664,5 +664,5 @@ post-proxy {
 #	Post-Proxy-Type Fail {
 #			detail
 #	}
-}
+#}
 
Index: freeradius-server-2.2.7/raddb/users
===================================================================
--- freeradius-server-2.2.7.orig/raddb/users
+++ freeradius-server-2.2.7/raddb/users
@@ -169,22 +169,22 @@
 #	by the terminal server in which case there may not be a "P" suffix.
 #	The terminal server sends "Framed-Protocol = PPP" for auto PPP.
 #
-DEFAULT	Framed-Protocol == PPP
-	Framed-Protocol = PPP,
-	Framed-Compression = Van-Jacobson-TCP-IP
+#DEFAULT	Framed-Protocol == PPP
+#	Framed-Protocol = PPP,
+#	Framed-Compression = Van-Jacobson-TCP-IP
 
 #
 # Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
 #
-DEFAULT	Hint == "CSLIP"
-	Framed-Protocol = SLIP,
-	Framed-Compression = Van-Jacobson-TCP-IP
+#DEFAULT	Hint == "CSLIP"
+#	Framed-Protocol = SLIP,
+#	Framed-Compression = Van-Jacobson-TCP-IP
 
 #
 # Default for SLIP: dynamic IP address, SLIP mode.
 #
-DEFAULT	Hint == "SLIP"
-	Framed-Protocol = SLIP
+#DEFAULT	Hint == "SLIP"
+#	Framed-Protocol = SLIP
 
 #
 # Last default: rlogin to our main server.