Browse Source

added pinouts to code and reference

master
studentidisinistra 2 years ago
parent
commit
708e16098f
2 changed files with 64 additions and 2 deletions
  1. +49
    -1
      PyCoffeeESP8266/PyCoffeeESP8266.ino
  2. +15
    -1
      PyCoffeeNano/PyCoffeeNano.ino

+ 49
- 1
PyCoffeeESP8266/PyCoffeeESP8266.ino View File

@ -4,6 +4,7 @@
#include <ESPAsyncWebServer.h>
#include <AsyncElegantOTA.h>
#include <Wire.h>
#include <LiquidCrystal.h>
AsyncWebServer server(80);
@ -32,12 +33,45 @@ const char index_html[] PROGMEM = R"rawliteral(
</body></html>)rawliteral";
// LCD pins <--> ESP8266 LOLIN D1 pins
const int e_RS = 4, e_EN = 5, e_D4 = 12, e_D5 = 13, e_D6 = 14, e_D7 = 15;
LiquidCrystal lcd(e_RS, e_EN, e_D4, e_D5, e_D6, e_D7);
// Custom character matrix (coffee cup left side)
byte cupL[8] = {0b00001,0b00010,0b00010,0b00001,0b00001,0b00000,0b00111,0b00100};
// Custom character matrix (coffee cup center)
byte cupC[8] = {0b00100,0b00101,0b01001,0b01000,0b00100,0b00000,0b11111,0b00000};
// Custom character matrix (coffee cup right side)
byte cupR[8] = {0b10000,0b00000,0b00000,0b10000,0b10000,0b00000,0b11000,0b01110};
// Custom character matrix (coffee cup left side line 2)
byte cupL1[8] = {0b00100,0b00100,0b00100,0b00010,0b01111,0b01000,0b00111,0b00000};
// Custom character matrix (coffee cup center line 2)
byte cupC1[8] = {0b00000,0b00000,0b00000,0b00000,0b11111,0b00000,0b11111,0b00000};
// Custom character matrix (coffee cup right side line 2)
byte cupR1[8] = {0b01010,0b01010,0b01110,0b10000,0b11100,0b00100,0b11000,0b00000};
void notFound(AsyncWebServerRequest *request) {
request->send(404, "text/plain", "Not found");
}
// the setup function runs once when you press reset or power the board
void setup(void) {
// initialize serial:
Serial.begin(9600);
// Make custom characters available to LCD
lcd.createChar(0, cupL);
lcd.createChar(1, cupC);
lcd.createChar(2, cupR);
lcd.createChar(3, cupL1);
lcd.createChar(4, cupC1);
lcd.createChar(5, cupR1);
lcd.begin(16, 2); // set up number of columns and rows
lcd.clear(); // Clear LCD
// this part is for testing and boot messages only
lcd.setCursor(0, 0); // move cursor to (0, 0)
lcd.print("PyCoffee_WiFi");
WiFi.mode(WIFI_STA);
// WiFi.config(INADDR_NONE, INADDR_NONE, INADDR_NONE, INADDR_NONE);
WiFi.setHostname(hostname.c_str()); //define hostname
@ -57,5 +91,19 @@ void setup(void) {
// the loop function runs over and over again forever
void loop() {
delay(1000);
lcd.clear(); // Clear LCD at every cycle
lcd.setCursor(0, 0); // move cursor to (0, 0)
lcd.print("Test");
lcd.setCursor(0, 1); // move cursor to (0, 0)
lcd.print("V ALPHA 0.1");
delay(1000);
lcd.setCursor(12,0); //print using uint8 method
lcd.write((uint8_t)0);
lcd.write((uint8_t)1);
lcd.write((uint8_t)2);
lcd.setCursor(12,1); //print using uint8 method
lcd.write((uint8_t)3);
lcd.write((uint8_t)4);
lcd.write((uint8_t)5);
}

+ 15
- 1
PyCoffeeNano/PyCoffeeNano.ino View File

@ -1,6 +1,20 @@
// Pinout configuration
const int grinderPin = 9, pumpPin = 8, boilerPin = 6, powderPin = 7, wheelPin = 10, invertWheelPin = 11, powderSensorPin = 2, vaporSensorPin = 5, tempSensorPin = 7, wheelStartSensorPin = 4, wheelEndSensorPin = 3, redLED = 13, greenLED = 12;
// Milliseconds to delay between each cycle
# define milliseconds 10;
int timeratio = 1;
void setup() {
// put your setup code here, to run once:
// first we set pins as I/O and initialize outputs LOW
pinMode ((grinderPin, pumpPin, boilerPin, powderPin, wheelPin, invertWheelPin, redLED, greenLED), OUTPUT);
pinMode ((powderSensorPin, vaporSensorPin, tempSensorPin, wheelStartSensorPin, wheelEndSensorPin), INPUT);
digitalWrite((grinderPin, pumpPin, boilerPin, powderPin, wheelPin, invertWheelPin, redLED, greenLED), LOW);
// timeratio easily allows to determine how many cycles are required to make 1s pass (ms * ratio = 1s)
timeratio = 1000/milliseconds;
// initialize serial:
Serial.begin(9600);
}
void loop() {


Loading…
Cancel
Save